Shop headings: New Spares | Used Spares | Accessories | Brands
Dimensions:
9.5mm ID, 24mm OD x 44 mm
Used for various applications including centre stand lug, side stand lug and brake lever heel rest
More than 5 in stock
13432640-z 13432640 GU13432640 13 43 26 40
1343 2640 1343.2640 13.43.26.40
£3.00
INC VAT
£2.50 EX VAT
Aluminium crush washer for large sump drain and filler plugs (big twins)
We advise changing this at every oil change. Can be used in place of Guzzi ref. 90714195
More than 5 in stock
95100709 GU95100709 95 10 07 09
9510 0709 9510.0709 95.10.07.09
£1.00
INC VAT
£0.83 EX VAT
Dimensions:
14mm outer diameter x 10.4mm inner diameter x 1mm
M10 crush washer used for sump (small twins, V11 Sport), gearbox and drive box level and drain plugs. Also used for lower fork damper retaining bolt washer. Used for sump drain on Breva 1100, 1200, Griso etc...
Also known as Guzzi ref. 25656100, 01528930, AP9150472, 95100309, 887879, 25656102, 486075, AP8163091
These may be supplied as either aluminium or copper crush washers
More than 5 in stock
10528900 GU10528900 10 52 89 00
1052 8900 1052.8900 10.52.89.00
£0.50
INC VAT
£0.42 EX VAT
Dimensions:
A3 - 298mm x 420mm
Stylish A3 Moto Guzzi Steam and Falcone poster featuring original artwork by Carl Hunton. Celebrating the age of steam the print commemorates s a time when everything moved more slowly. Equally at home in your workshop or living room, treat yourself to this inspiring and timeless image, or buy a friend the perfect Guzzi gift.
Printed on high quality glossy A3 paper, ready to frame
More than 5 in stock
£4.00
INC VAT
£3.33 EX VAT
Dimensions:
500ml
500ml AGIP brake and clutch fluid, this is a high performance DOT 3 and 4 fluid suitable for all Moto Guzzis
Mixes safely with other DOT 3, DOT 4 and DOT 5.1 brake and clutch fluids.
See BRA99013 for high performance alternative.
If you are having problems bleeding your brakes you may need one of our one way bleed nipples BRA41651 and BRA41650
Please note this part CANNOT be posted outside of the UK mainland area
More than 5 in stock
£7.92
INC VAT
£6.60 EX VAT
Dimensions:
9mm OD base
12v bayonet bulb used for instrument backlighting and pilot / side light. Can be used in place of Guzzi ref. 3450119 and 10744910. See LIA17763 for long lasting LED alternative
12 volt, 3 watt
More than 5 in stock
17762150 GU17762150 17 76 21 50
1776 2150 1776.2150 17.76.21.50
£2.30
INC VAT
£1.92 EX VAT
Dimensions:
M5 x 30mm
A2 Stainless steel M5 socket cap screw, many uses including as long screw retaining filler cap, 3 required on 1100 Sport, Daytona and V11 Sport
More than 5 in stock
98690230 GU98690230 98 69 02 30
9869 0230 9869.0230 98.69.02.30
£0.80
INC VAT
£0.67 EX VAT
Dimensions:
M10
Stainless steel M10 full nut, many applications
More than 5 in stock
£0.50
INC VAT
£0.42 EX VAT
Dimensions:
47mm OD
Sealed ball bearing used as rear wheel bearing for cast and spoked wheels
2 bearings required per wheel. Also used as front wheel bearing in spoked wheels on these models: Cali 1100, S3, T3, G5, Mille GT, Cali 3, Convert, Strada 1000, 1000S, Cali Jackal, Cali Stone, Cali Special (tube rim), Cali Vintage (tube rim), Cali Classic (2006-2007), 850 GT (disc braked version). Front wheel only for 750S / V7 Sport.
More than 5 in stock
92204220-z 92204220 GU92204220 92 20 42 20
9220 4220 9220.4220 92.20.42.20
£10.00
INC VAT
£8.33 EX VAT
Uninsulated ring terminal suitable for earth leads or battery leads. Crimp and solder your lead for maximum security
Crimp connector takes M8 bolt, flared 5mm diameter cable entry for 16sq.mm / 4mm OD wire
More than 5 in stock
£1.00
INC VAT
£0.83 EX VAT
Secure online shopping 
